Where is the difference between a few hundred yuan inflatable boat and a PVC rubber boat?

Material difference:

In terms of materials, the material thickness of inflatable boats on Taobao is generally about 0.4 mm of pvc or plastic materials, the material thickness is relatively thin, and it is a single air chamber design, that is, there is only 1 air chamber or 2 air chambers, professional rubber boats are professional inflatable boat materials: Imported PVC material, thickness 0.9 mm, there are 1100D strength fiber net in the material, equivalent to 2 layers of pvc material sandwiching a layer of strength fiber net, can increase tension and impact resistance, and this PVC material is added with anti-ultraviolet raw materials, can be in long-term sunlight exposure without deformation or cracking leakage. And this PVC material has replaced the traditional pure rubber material and become the mainstream material of today's inflatable boats.

Professional PVC rubber boats all use multi-chamber design, that is, there are 3-6 air holes on a boat, and the corresponding buoyancy can still be maintained in the case of one of the air chambers leaking, so the multi-chamber design will make the crew safer.

The difference between parts:

Compared with ordinary rubber boats, the paddle of professional pvc rubber boats is stronger, and the material thickness of aluminum alloy is thicker, which can ensure that it can be used for a long time without breaking or cracking. Commonly used parts such as the paddle lock are in the form of plastic and metal buckle. This production process can ensure that it will not be damaged because of excessive force in the process of frequent sliding.

Weight difference:

In fact, to judge the quality of a boat as long as you ask the seller the weight of the boat, the weight of the professional rubber boat about 2.5 meters must be more than 30 kilograms, if it is an ordinary inflatable boat weight should be a little more than 10 kilograms or lower, and the price above, the professional PVC rubber boat generally 2.5 meters price should be more than 2000 yuan. If the price is too low, you should pay attention to whether there is a problem.

Suspension power difference:

Most ordinary inflatable boats do not have suspension power tailplate, if you need to increase the electric or fuel outboard machine, you need to buy another price of about 140-170 stainless steel pipe tailplate, then please note that your machine weight can not be too heavy, which means that you can only choose a small machine of 2-3HP, For 3-4 people ordinary inflatable boat with a length of about 3 meters, such power is obviously not enough, but if you need to hang a larger power outboard machine, such as about 6HP outboard machine, the weight of this power machine is generally about 20KG, the stainless steel support after the ordinary inflatable boat is unable to withstand such a large weight, the performance is the stern bend. The engine will sink in the water.

Professional pvc rubber boat tail has a professional hanging tail plate, the thickness of the tail plate is generally 30-45 mm, such a thickness is enough to withstand 23-50Kg of the weight of the ship, which means that you will not restrict the power size of the ship because of the ship.

Price difference:

Generally, the price of inflatable boats is about a few hundred yuan, and the price of professional PVC rubber boat cloth is generally between 2000-5000 yuan, there is still a big difference, but if the average cost of use will be different each time, because the latter can be used for a long time without damage, and most of the former is 3-5 times of life.

Way of use:

Hundreds of yuan inflatable boats are mostly toys used in swimming pools, this boat can not enter the natural waters, because the hull and joints due to the shortcomings of the hot melt process can not withstand too much spray or wave impact from external forces, it is easy to cause pressure loss and material tearing, which is a very dangerous thing in the river, lake and sea.